Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the Denver metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in Denver, CO and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across Denver and nearby Colorado metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around Denver, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in Denver follows the grid: Xcel Energy and Suncor Commerce City Refinery. Demand has grown with the metro's data center build-out — CoreSite Denver campus and Flexential Denver data centers — where every hall arrives with its own transformers, gensets, and switchgear. Plants in the metro's aerospace and satellite manufacturing, craft brewing and beverage production, petroleum refining, and food processing and cold storage distribution add standby power and unit substations on their own schedule.
Denver, CO runs on energy & construction equipment, and almost none of it stays put. Same crews and the same transformer and generator rigging standards across the region:
Utilities, plants, campuses, and data centers across Denver all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the Waterton Canyon aerospace campus in Jefferson County, the Centennial Airport aerospace corridor in Arapahoe County, the Commerce City refining and rail district north of downtown, and the Globeville and Elyria-Swansea industrial corridor along the South Platte River, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: Denver's buildings are a mix of century-old brick and heavy-timber industrial buildings in the Globeville and Elyria-Swansea corridor with rail spurs and narrow bays, and newer clear-span distribution buildings along the I-70 and I-76 corridors, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the Denver metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the Denver metro.
Switchgear lineups and motor control centers moved into electrical rooms across the Denver metro.
Units rigged into basement vaults and indoor substations across the Denver metro.
Plenty of Denver jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-25, I-70 and I-76, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every transformer & generator rigging job in Denver, CO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Denver jobs. For bigger moves we walk both sites before we price anything.
The same Denver crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Denver? See truck dispatch for fleets of 4+ trucks.
Working throughout Denver, CO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout Denver and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Aurora | Adams County | 8 mi |
| Lakewood | Jefferson County | 6 mi |
| Commerce City | Adams County | 6 mi |
| Thornton | Adams County | 9 mi |
| Westminster | Adams County | 7 mi |
| Arvada | Jefferson County | 7 mi |
| Centennial | Arapahoe County | 13 mi |
| Brighton | Adams County | 19 mi |
| Golden | Jefferson County | 13 mi |
| Boulder | Boulder County | 24 mi |
| Greeley | Weld County | 50 mi |
| Highlands Ranch | Douglas County | 13 mi |
| Longmont | Boulder County | 30 mi |
| Loveland | Larimer County | 46 mi |
| Broomfield | Broomfield County | 14 mi |
| Castle Rock | Douglas County | 26 mi |
| Parker | Douglas County | 19 mi |
| Littleton | Arapahoe County | 9 mi |
| Northglenn | Adams County | 10 mi |
| Dakota Ridge | Jefferson County | 12 mi |
| Englewood | Arapahoe County | 6 mi |
| Ken Caryl | Jefferson County | 13 mi |
| Wheat Ridge | Jefferson County | 5 mi |
| Lafayette | Boulder County | 18 mi |
Moving across the metro or out of state? See all our Denver services or get a quote.
Most Denver jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Denver crew.
industrial rigging in Denver →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Denver as one accountable job.
machinery moving in Denver →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Denver.
CNC machine movers in Denver →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Denver plants.
Denver plant & factory relocation →In Denver we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Denver.
The same Denver crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Denver: heavy lift rigging, chiller and HVAC rigging, MRI and medical equipment rigging, lab equipment moving, and printing press moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Denver Transformer Quote