Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the Billings metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in Billings, MT and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across Billings and nearby Montana metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around Billings, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in Billings follows the grid: NorthWestern Energy, Phillips 66 Billings Refinery, and Par Montana Billings Refinery. Plants in the metro's petroleum refining, sugar beet and food processing, agricultural equipment and grain handling, and oilfield and energy equipment services add standby power and unit substations on their own schedule.
Billings, MT runs on energy & ag, and almost none of it stays put. Same crews and the same transformer and generator rigging standards across the region:
Utilities, plants, campuses, and data centers across Billings all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the Lockwood Industrial Park straddling the BNSF mainline east of the city and the refinery row along the Yellowstone River northeast of downtown, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: Billings's buildings are rail-served industrial and distribution buildings in the Lockwood district along the BNSF mainline, alongside the process and maintenance buildings of the refineries on the Yellowstone River, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the Billings metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the Billings metro.
Switchgear lineups and motor control centers moved into electrical rooms across the Billings metro.
Units rigged into basement vaults and indoor substations across the Billings metro.
Plenty of Billings jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-90, I-94 and I-15, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every transformer & generator rigging job in Billings, MT is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Billings jobs. For bigger moves we walk both sites before we price anything.
The same Billings crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Billings? See truck dispatch for fleets of 4+ trucks.
Working throughout Billings, MT and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout Billings and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Laurel | Yellowstone County | 15 mi |
| Lockwood | Yellowstone County | 5 mi |
| Shepherd | Yellowstone County | 13 mi |
| Hardin | Big Horn County | 43 mi |
| Columbus | Stillwater County | 38 mi |
| Roundup | Musselshell County | 46 mi |
| Hysham | Treasure County | 70 mi |
| Worden | Yellowstone County | 20 mi |
Moving across the metro or out of state? See all our Billings services or get a quote.
Most Billings jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Billings crew.
Billings industrial rigging →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Billings as one accountable job.
Billings machinery movers →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Billings.
Billings CNC machine moving →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Billings plants.
factory relocation in Billings →In Billings we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Billings.
The same Billings crew also handles millwright services, machinery removal, and crane and rigging services.
Specialty rigging in Billings: heavy lift rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Billings Transformer Quote