Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the Salt Lake City metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in Salt Lake City, UT and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across Salt Lake City and nearby Utah metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around Salt Lake City, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in Salt Lake City follows the grid: Rocky Mountain Power, Chevron Salt Lake City Refinery, and HF Sinclair Woods Cross Refinery. Demand has grown with the metro's data center build-out — NSA Utah Data Center, Bluffdale and Novva Data Centers West Jordan — where every hall arrives with its own transformers, gensets, and switchgear. Plants in the metro's medical device manufacturing, aerospace and precision-machined components, mining and mineral-processing equipment, and outdoor-gear and apparel manufacturing add standby power and unit substations on their own schedule.
Salt Lake City, UT runs on mining & industrial, and almost none of it stays put. Same crews and the same transformer and generator rigging standards across the region:
Utilities, plants, campuses, and data centers across Salt Lake City all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the Redwood Road Industrial District, the Beck Street Industrial District, the Union Pacific-developed Pioneer Business Park and Centennial Business Park on the west side, and the Salt Lake City intermodal terminal district tied to the Utah Inland Port, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: Salt Lake City's buildings are a mix of older Union Pacific-era single-storey industrial buildings across the west-side rail districts alongside newer distribution buildings built around the inland port, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the Salt Lake City metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the Salt Lake City metro.
Switchgear lineups and motor control centers moved into electrical rooms across the Salt Lake City metro.
Units rigged into basement vaults and indoor substations across the Salt Lake City metro.
Plenty of Salt Lake City jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-15, I-80 and I-70, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every transformer & generator rigging job in Salt Lake City, UT is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Salt Lake City jobs. For bigger moves we walk both sites before we price anything.
The same Salt Lake City crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Salt Lake City? See truck dispatch for fleets of 4+ trucks.
Working throughout Salt Lake City, UT and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout Salt Lake City and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| West Valley City | Salt Lake County | 8 mi |
| Sandy | Salt Lake County | 12 mi |
| Ogden | Weber County | 32 mi |
| Provo | Utah County | 38 mi |
| Orem | Utah County | 34 mi |
| West Jordan | Salt Lake County | 11 mi |
| Layton | Davis County | 21 mi |
| Tooele | Tooele County | 27 mi |
| Lehi | Utah County | 26 mi |
| Clearfield | Davis County | 25 mi |
| South Jordan | Salt Lake County | 14 mi |
| Millcreek | Salt Lake County | 5 mi |
| Taylorsville | Salt Lake County | 7 mi |
| Murray | Salt Lake County | 7 mi |
| Draper | Salt Lake County | 16 mi |
| Bountiful | Davis County | 9 mi |
| Riverton | Salt Lake County | 17 mi |
| Pleasant Grove | Utah County | 29 mi |
| Roy | Weber County | 29 mi |
| Spanish Fork | Utah County | 46 mi |
| Kearns | Salt Lake County | 9 mi |
| Cottonwood Heights | Salt Lake County | 11 mi |
| Midvale | Salt Lake County | 10 mi |
| Springville | Utah County | 44 mi |
Moving across the metro or out of state? See all our Salt Lake City services or get a quote.
Most Salt Lake City jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Salt Lake City crew.
Salt Lake City riggers →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Salt Lake City as one accountable job.
Salt Lake City machinery moving company →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Salt Lake City.
Salt Lake City CNC movers →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Salt Lake City plants.
plant relocation in Salt Lake City →In Salt Lake City we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Salt Lake City.
The same Salt Lake City crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Salt Lake City: heavy lift rigging, chiller and HVAC rigging, MRI and medical equipment rigging, and lab equipment moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Salt Lake City Transformer Quote