Getting an old machine out of a Denver plant is often harder than the day it went in — the building grew around it, the door got smaller, and nobody labeled the utilities. We rig out retired machines, production lines, and whole plants across the Denver metro, and hand the floor back ready for what comes next.
Quick answer: Badass Logistics provides machinery removal & decommissioning in Denver, CO and the surrounding metro. We disconnect, rig out, and remove retired machines, production lines, and whole plants — sequenced around buyers, relocation loads, and scrap so the floor is handed back clean. Our crews work across Denver and nearby Colorado metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Removal is not junk hauling. A machine being sold has to reach its buyer working; one being scrapped still has to come out without damaging the building, the machines staying behind, or the people around it. Across Denver's energy & construction equipment base, most removals are one of three things — a single machine being replaced, a line being retired, or a whole floor coming out for a closure or lease exit.
Badass Logistics coordinates lockout with your maintenance team or licensed trades, tags every asset, drains and secures what has to be drained, splits what won't fit the opening, and sequences the load-out so nothing blocks the dock. Resale units are prepped and loaded for the buyer, relocation units run as project freight through our licensed broker and carrier partners, and when the rest of the plant is moving too, it becomes a plant relocation.
Removals in Denver are decided by the building before the machine. The stock here is a mix of century-old brick and heavy-timber industrial buildings in the Globeville and Elyria-Swansea corridor with rail spurs and narrow bays, and newer clear-span distribution buildings along the I-70 and I-76 corridors — and a door, column line, or mezzanine installed after the machine went in is the most common reason one has to be split to come out. Most of the retired equipment we pull in this metro sits in the Waterton Canyon aerospace campus in Jefferson County, the Centennial Airport aerospace corridor in Arapahoe County, the Commerce City refining and rail district north of downtown, and the Globeville and Elyria-Swansea industrial corridor along the South Platte River.
Denver, CO runs on energy & construction equipment, and almost none of it stays put. Same crews and the same machinery removal standards across the region:
Denver's industrial base — energy & construction equipment — runs on equipment that doesn't move like freight. Turnaround windows, site safety rules, and heavy concentrated loads on process pads set the schedule. Typical removal jobs for Denver customers include:
The units coming out of Denver plants are usually satellite and spacecraft assembly tooling, brewing and fermentation vessels, refinery process equipment, and cold storage and food processing machinery. Each has its own drain-down, lockout points, and resale value — which is why they are tagged by destination before the first one is disconnected. Removals here track the churn in the metro's aerospace and satellite manufacturing, craft brewing and beverage production, petroleum refining, and food processing and cold storage distribution: a line retired for a model change, a floor cleared for a consolidation, or a building handed back at lease end.
Presses, machine tools, molding machines, and compressors disconnected and rigged out across the Denver metro.
Production lines and cells dismantled in sequence, tagged, and removed across the Denver metro.
Whole-floor removal for closures, consolidations, and lease exits across the Denver metro.
Machines prepped, protected, and loaded so the buyer receives them working across the Denver metro.
Plenty of Denver jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-25, I-70 and I-76, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every machinery removal & decommissioning job in Denver, CO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Denver jobs. For bigger moves we walk both sites before we price anything.
The same Denver crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Denver? See truck dispatch for fleets of 4+ trucks.
Working throughout Denver, CO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Machinery Removal & Decommissioning throughout Denver and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Aurora | Adams County | 8 mi |
| Lakewood | Jefferson County | 6 mi |
| Commerce City | Adams County | 6 mi |
| Thornton | Adams County | 9 mi |
| Westminster | Adams County | 7 mi |
| Arvada | Jefferson County | 7 mi |
| Centennial | Arapahoe County | 13 mi |
| Brighton | Adams County | 19 mi |
| Golden | Jefferson County | 13 mi |
| Boulder | Boulder County | 24 mi |
| Greeley | Weld County | 50 mi |
| Highlands Ranch | Douglas County | 13 mi |
| Longmont | Boulder County | 30 mi |
| Loveland | Larimer County | 46 mi |
| Broomfield | Broomfield County | 14 mi |
| Castle Rock | Douglas County | 26 mi |
| Parker | Douglas County | 19 mi |
| Littleton | Arapahoe County | 9 mi |
| Northglenn | Adams County | 10 mi |
| Dakota Ridge | Jefferson County | 12 mi |
| Englewood | Arapahoe County | 6 mi |
| Ken Caryl | Jefferson County | 13 mi |
| Wheat Ridge | Jefferson County | 5 mi |
| Lafayette | Boulder County | 18 mi |
Moving across the metro or out of state? See all our Denver services, Machinery Removal across Colorado or get a quote.
We run machinery removal & decommissioning in metros across Colorado — pick the nearest crew:
Most Denver jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Denver crew.
industrial rigging in Denver →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Denver as one accountable job.
machinery moving in Denver →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Denver.
CNC machine movers in Denver →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Denver plants.
Denver plant & factory relocation →In Denver we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Denver.
The same Denver crew also handles millwright services, crane and rigging services, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Denver Removal Quote