Getting a machine onto its pad in Denver is rigging. Getting it to run true is millwright work — set on its anchors, leveled to the builder's spec, shafts and couplings aligned, and the line put back together in order. Across the Denver metro, the crew that moved it is the crew that makes it ready to run.
Quick answer: Badass Logistics provides millwright & machine installation in Denver, CO and the surrounding metro. We set, anchor, level, and align industrial machinery and reassemble conveyors and lines, so equipment is handed off ready for utilities and start-up. Our crews work across Denver and nearby Colorado metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A machine that arrives in one piece can still fail on start-up. A soft foot, a coupling a few thousandths out, a conveyor transfer that sits proud of the next section — those are installation faults, not transport faults, and they show up as vibration, bearing wear, and scrap. In Denver's energy & construction equipment plants, that is the work a millwright is there to prevent.
Badass Logistics sets equipment on baseplates and foundations, positions anchor bolts, chocks, and shim packs to the layout, levels to the builder's spec with precision and optical tools, and aligns motors, pumps, and gearboxes by laser or dial indicator. Electrical, piping, and grouting stay with the trades that own them — we sequence around them. When the machine is new, it can arrive as project freight; when it is being relocated, the move and the installation are one job.
Millwright work in Denver is set by what has to be installed: satellite and spacecraft assembly tooling, brewing and fermentation vessels, refinery process equipment, and cold storage and food processing machinery, each with its own foundation, anchor pattern, and leveling tolerance. Those machines serve the metro's aerospace and satellite manufacturing, craft brewing and beverage production, petroleum refining, and food processing and cold storage distribution, where a drive train a few thousandths out shows up as vibration, bearing wear, and scrap long before anyone calls it an installation fault.
Denver, CO runs on energy & construction equipment, and almost none of it stays put. Same crews and the same millwright services standards across the region:
Denver's industrial base — energy & construction equipment — runs on equipment that doesn't move like freight. Turnaround windows, site safety rules, and heavy concentrated loads on process pads set the schedule. Typical millwright jobs for Denver customers include:
The floors matter as much as the machines. Denver's plants are a mix of century-old brick and heavy-timber industrial buildings in the Globeville and Elyria-Swansea corridor with rail spurs and narrow bays, and newer clear-span distribution buildings along the I-70 and I-76 corridors, and an older slab is often why a machine needs a new pad, re-drilled anchors, or a grout crew before it can be leveled at all. Most of our Denver installation work lands in the Waterton Canyon aerospace campus in Jefferson County, the Centennial Airport aerospace corridor in Arapahoe County, the Commerce City refining and rail district north of downtown, and the Globeville and Elyria-Swansea industrial corridor along the South Platte River.
Equipment set on baseplates and foundations, anchors and shim packs positioned to the layout across the Denver metro.
Machines leveled to the builder's installation spec across the Denver metro.
Motors, pumps, gearboxes, and driven equipment aligned by laser or dial indicator across the Denver metro.
Conveyor sections, transfers, and production lines reassembled in order across the Denver metro.
Plenty of Denver jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-25, I-70 and I-76, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every millwright & machine installation job in Denver, CO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Denver jobs. For bigger moves we walk both sites before we price anything.
The same Denver crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Denver? See truck dispatch for fleets of 4+ trucks.
Working throughout Denver, CO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Millwright & Machine Installation throughout Denver and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Aurora | Adams County | 8 mi |
| Lakewood | Jefferson County | 6 mi |
| Commerce City | Adams County | 6 mi |
| Thornton | Adams County | 9 mi |
| Westminster | Adams County | 7 mi |
| Arvada | Jefferson County | 7 mi |
| Centennial | Arapahoe County | 13 mi |
| Brighton | Adams County | 19 mi |
| Golden | Jefferson County | 13 mi |
| Boulder | Boulder County | 24 mi |
| Greeley | Weld County | 50 mi |
| Highlands Ranch | Douglas County | 13 mi |
| Longmont | Boulder County | 30 mi |
| Loveland | Larimer County | 46 mi |
| Broomfield | Broomfield County | 14 mi |
| Castle Rock | Douglas County | 26 mi |
| Parker | Douglas County | 19 mi |
| Littleton | Arapahoe County | 9 mi |
| Northglenn | Adams County | 10 mi |
| Dakota Ridge | Jefferson County | 12 mi |
| Englewood | Arapahoe County | 6 mi |
| Ken Caryl | Jefferson County | 13 mi |
| Wheat Ridge | Jefferson County | 5 mi |
| Lafayette | Boulder County | 18 mi |
Moving across the metro or out of state? See all our Denver services, Millwright Services across Colorado or get a quote.
We run millwright & machine installation in metros across Colorado — pick the nearest crew:
Most Denver jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Denver crew.
industrial rigging in Denver →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Denver as one accountable job.
machinery moving in Denver →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Denver.
CNC machine movers in Denver →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Denver plants.
Denver plant & factory relocation →In Denver we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Denver.
The same Denver crew also handles machinery removal, crane and rigging services, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Denver Millwright Quote