Finding a crane in Denver is the easy part. The hard part is the lift plan, the rigging, the ground under the outriggers, and the crew that signals the pick. We plan and rig crane lifts across the Denver metro from start to finish — and bring in the right crane for the load, the radius, and the site.
Quick answer: Badass Logistics provides crane & rigging services in Denver, CO and the surrounding metro. We plan the lift, bring in the crane sized to the load, radius, and site, and rig, signal, and set the pick with our own crew. Our crews work across Denver and nearby Colorado metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A crane rental gets you a machine and an operator. It does not get you the load weight and center of gravity, the rigging that attaches to the right points, the ground-bearing check under the outriggers, the street or site closure, or the crew that takes the load off the hook and moves it into the building. On Denver's energy & construction equipment jobs, those are the parts that decide whether a pick goes to plan.
Badass Logistics owns the lift, not just the hook time. We size the crane to the load and radius, write the lift plan, rig and signal the pick, and set the load — and where the crane can only reach the door or the dock, the same crew takes it the rest of the way with jacks, skates, and gantries. Crane rental vs a rigging company →
Crane work in Denver, CO concentrates in the Waterton Canyon aerospace campus in Jefferson County, the Centennial Airport aerospace corridor in Arapahoe County, the Commerce City refining and rail district north of downtown, and the Globeville and Elyria-Swansea industrial corridor along the South Platte River, and each of those sets up differently — lot space for outriggers, overhead lines, rail spurs, and neighbors that can't be shut down. The buildings are a mix of century-old brick and heavy-timber industrial buildings in the Globeville and Elyria-Swansea corridor with rail spurs and narrow bays, and newer clear-span distribution buildings along the I-70 and I-76 corridors, which usually decides whether the crane sets the load inside through a roof opening or at the door for the crew to skate in.
Denver, CO runs on energy & construction equipment, and almost none of it stays put. Same crews and the same crane and rigging services standards across the region:
Denver's industrial base — energy & construction equipment — runs on equipment that doesn't move like freight. Turnaround windows, site safety rules, and heavy concentrated loads on process pads set the schedule. Typical crane lifts for Denver customers include:
The picks that come up most in Denver are satellite and spacecraft assembly tooling, brewing and fermentation vessels, refinery process equipment, and cold storage and food processing machinery — and the crane is sized to the heaviest of them at the longest radius the site forces, not to the weight alone. Who is asking changes the plan as much as what is being lifted: a pick for Denver's aerospace and satellite manufacturing, craft brewing and beverage production, petroleum refining, or food processing and cold storage distribution usually lands inside a running site, so the lift window, the exclusion zone, and the traffic plan are written around their operation.
RTUs, chillers, cooling towers, and mechanical equipment picked onto roofs across the Denver metro.
Presses and production equipment lifted on and off trucks or into buildings across the Denver metro.
Close-to-capacity, high-value, and two-crane picks with detailed plans across the Denver metro.
Tanks, vessels, generators, and skids placed on foundations and pads across the Denver metro.
Plenty of Denver jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-25, I-70 and I-76, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every crane & rigging services job in Denver, CO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Denver jobs. For bigger moves we walk both sites before we price anything.
The same Denver crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Denver? See truck dispatch for fleets of 4+ trucks.
Working throughout Denver, CO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Crane & Rigging Services throughout Denver and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Aurora | Adams County | 8 mi |
| Lakewood | Jefferson County | 6 mi |
| Commerce City | Adams County | 6 mi |
| Thornton | Adams County | 9 mi |
| Westminster | Adams County | 7 mi |
| Arvada | Jefferson County | 7 mi |
| Centennial | Arapahoe County | 13 mi |
| Brighton | Adams County | 19 mi |
| Golden | Jefferson County | 13 mi |
| Boulder | Boulder County | 24 mi |
| Greeley | Weld County | 50 mi |
| Highlands Ranch | Douglas County | 13 mi |
| Longmont | Boulder County | 30 mi |
| Loveland | Larimer County | 46 mi |
| Broomfield | Broomfield County | 14 mi |
| Castle Rock | Douglas County | 26 mi |
| Parker | Douglas County | 19 mi |
| Littleton | Arapahoe County | 9 mi |
| Northglenn | Adams County | 10 mi |
| Dakota Ridge | Jefferson County | 12 mi |
| Englewood | Arapahoe County | 6 mi |
| Ken Caryl | Jefferson County | 13 mi |
| Wheat Ridge | Jefferson County | 5 mi |
| Lafayette | Boulder County | 18 mi |
Moving across the metro or out of state? See all our Denver services or get a quote.
Most Denver jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Denver crew.
industrial rigging in Denver →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Denver as one accountable job.
machinery moving in Denver →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Denver.
CNC machine movers in Denver →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Denver plants.
Denver plant & factory relocation →In Denver we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Denver.
The same Denver crew also handles millwright services, machinery removal, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Denver Crane Lift Quote