An MRI magnet is one of the heaviest single pieces a Seattle hospital will ever bring through its doors — and it has to arrive without a scratch, inside a building that never closes. We plan the route, rig the magnet and its components, and set them for the OEM's install team across the Seattle metro.
Quick answer: Badass Logistics provides MRI & medical equipment rigging in Seattle, WA and the surrounding metro. We rig MRI magnets, CT, PET/CT, cath lab, and linac components into and out of hospitals and imaging centers — on planned routes, with tilt and shock monitoring, sequenced around the OEM's install team. Our crews work across Seattle and nearby Washington metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Imaging equipment does not move like freight. A magnet has strict tilt and shock limits, a CT gantry carries delicate rotating components, and the route runs through corridors, elevators, and floors that were built for patients. In Seattle's hospitals and imaging centers, the move is also planned around infection control and a schedule that keeps clinical areas open.
Badass Logistics plans the route from the truck to the suite — rated elevator, wall or knockout opening, or a crane pick to an upper floor — and checks floor loading at every stage. Magnet ramp-down, cryogens, and calibration stay with the OEM; we rig and set what they hand us, with monitoring recorded throughout. How to move an MRI machine →
Seattle's imaging work is anchored by its health systems — UW Medicine / Harborview Medical Center, Swedish Medical Center, Virginia Mason Medical Center, and Fred Hutchinson Cancer Center — and by the outpatient imaging centers that ring them. Each of them replaces scanners on a cycle, and each replacement means a magnet out, a magnet in, and a suite that has to reopen on a date.
Seattle, WA runs on aerospace tooling & port cargo, and almost none of it stays put. Same crews and the same MRI and medical equipment rigging standards across the region:
Hospital imaging departments, outpatient imaging centers, and cancer centers across Seattle replace equipment on a steady cycle. The equipment we rig for them includes:
The buildings set the route. Downtown and South Lake Union office towers, the UW and First Hill hospital campuses, and Sea-Tac Airport carry large central plant, and an imaging suite in any of them can sit on an upper floor, in a basement, or behind a corridor that was never built for a magnet.
Magnets rigged in, out, and between suites with tilt and shock monitoring across the Seattle metro.
Gantries, tables, and cabinets moved and set for the install team across the Seattle metro.
C-arms, ceiling mounts, and components handled as one sequenced job across the Seattle metro.
Linac components rigged into vaults on planned routes across the Seattle metro.
Plenty of Seattle jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-5, I-90 and I-82, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Research imaging adds a second kind of job. University of Washington, Fred Hutchinson Cancer Center, and Allen Institute run scanners and instruments outside the clinical schedule, often in older research buildings where the route has to be engineered around floors that were never rated for a magnet.
Every MRI & medical equipment rigging job in Seattle, WA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Seattle jobs. For bigger moves we walk both sites before we price anything.
The same Seattle crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Seattle? See truck dispatch for fleets of 4+ trucks.
Working throughout Seattle, WA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
MRI & Medical Equipment Rigging throughout Seattle and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Tacoma | Pierce County | 25 mi |
| Bellevue | King County | 6 mi |
| Kent | King County | 16 mi |
| Renton | King County | 10 mi |
| Auburn | King County | 21 mi |
| Everett | Snohomish County | 27 mi |
| Federal Way | King County | 20 mi |
| Sumner | Pierce County | 28 mi |
| Fife | Pierce County | 25 mi |
| Lakewood | Pierce County | 31 mi |
| Kirkland | King County | 8 mi |
| Marysville | Snohomish County | 32 mi |
| Redmond | King County | 11 mi |
| Olympia | Thurston County | 47 mi |
| Shoreline | King County | 10 mi |
| South Hill | Pierce County | 32 mi |
| Sammamish | King County | 12 mi |
| Burien | King County | 9 mi |
| Lacey | Thurston County | 46 mi |
| City of Sammamish | King County | 14 mi |
| Bothell | King County | 12 mi |
| Edmonds | Snohomish County | 14 mi |
| Puyallup | Pierce County | 29 mi |
| Bremerton | Kitsap County | 14 mi |
Moving across the metro or out of state? See all our Seattle services or get a quote.
Most Seattle jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Seattle crew.
industrial rigging in Seattle →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Seattle as one accountable job.
machinery moving in Seattle →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Seattle.
CNC machine movers in Seattle →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Seattle plants.
Seattle plant & factory relocation →In Seattle we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Seattle.
The same Seattle crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Seattle: heavy lift rigging, chiller and HVAC rigging, lab equipment moving, and printing press moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Seattle MRI Rigging Quote