Inside a Phoenix plant there is usually no room for a crane — a roof overhead, live equipment either side, and a floor that has to carry the load the whole way. That is where heavy lift rigging takes over: hydraulic gantries, jacks and cribbing, and skid tracks that move the heaviest pieces in the building without a hook.
Quick answer: Badass Logistics provides heavy lift rigging in Phoenix, AZ and the surrounding metro. We lift, jack, skid, and set heavy equipment with hydraulic gantries, jacking and cribbing, and skid systems — the methods for loads a crane can't reach, can't set up beside, or isn't allowed inside. Our crews work across Phoenix and nearby Arizona metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A crane needs open sky, outrigger space, and ground that can take the bearing. Most heavy equipment in Phoenix sits where none of that exists — under a bay roof, in a pit, behind a column line, or in a building the load has to roll into. In Phoenix's semiconductor fabs & construction plants, the way a heavy piece moves is usually up a few inches, along a planned path, and down onto its set point.
Badass Logistics plans those lifts from the load data out: weight and center of gravity, the lift points the builder allows, floor capacity along the route, and the headroom at every stage. We set hydraulic gantries where the piece has to go up, jack and crib it where it has to come off a truck or a foundation, and skid or roll it where it has to travel. When there is room for a crane, the crane lift and the inside move go into one plan. Jacking and skidding, explained →
The buildings decide the method in Phoenix. The stock here is newer large single-storey clear-span industrial and cleanroom buildings concentrated in the West Valley and Chandler, built with wide bays for semiconductor and logistics floor plans, which is why so many heavy pieces move under a gantry or on skid track rather than on a hook. The heaviest loads in the metro are wafer fabrication and cleanroom equipment, CNC machining centers, surface-mount electronics lines, and material handling conveyors — each one planned from its weight, lift points, and the floor under it.
Phoenix, AZ runs on semiconductor fabs & construction, and almost none of it stays put. Same crews and the same heavy lift rigging standards across the region:
The loads that need these methods are the heaviest and most awkward in the building. Typical Phoenix heavy lifts include:
That equipment serves Phoenix's semiconductor manufacturing, aerospace component manufacturing, electronics assembly, and distribution and fulfillment logistics, where a lift usually happens beside machinery that keeps running. Most of our jacking and gantry work here lands in the TSMC campus corridor along I-17 in north Phoenix, the Intel Ocotillo campus in Chandler, and the West Valley industrial belt around Goodyear and Glendale.
Loads lifted and traversed under roofs and inside bays where a crane cannot set up across the Phoenix metro.
Heavy pieces raised off trailers, foundations, and pits in controlled stages across the Phoenix metro.
Loads moved along engineered skid tracks or on rollers to the set point across the Phoenix metro.
Equipment lowered onto anchors, soleplates, and foundations to the layout across the Phoenix metro.
Plenty of Phoenix jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-17 and I-40, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every heavy lift rigging job in Phoenix, AZ is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Phoenix jobs. For bigger moves we walk both sites before we price anything.
The same Phoenix crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Phoenix? See truck dispatch for fleets of 4+ trucks.
Working throughout Phoenix, AZ and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Heavy Lift Rigging throughout Phoenix and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Mesa | Maricopa County | 15 mi |
| Chandler | Maricopa County | 17 mi |
| Glendale | Maricopa County | 9 mi |
| Tempe | Maricopa County | 10 mi |
| Scottsdale | Maricopa County | 11 mi |
| Gilbert | Maricopa County | 18 mi |
| Peoria | Maricopa County | 13 mi |
| Surprise | Maricopa County | 20 mi |
| Goodyear | Maricopa County | 16 mi |
| Buckeye | Maricopa County | 30 mi |
| Casa Grande | Pinal County | 43 mi |
| Tempe Junction | Maricopa County | 8 mi |
| San Tan Valley | Pinal County | 36 mi |
| Avondale | Maricopa County | 16 mi |
| Maricopa | Pinal County | 27 mi |
| Apache Junction | Pinal County | 30 mi |
| Sun City | Maricopa County | 15 mi |
| Queen Creek | Maricopa County | 29 mi |
| El Mirage | Maricopa County | 18 mi |
| Florence | Pinal County | 49 mi |
| Sun City West | Maricopa County | 21 mi |
| Fountain Hills | Maricopa County | 23 mi |
| New River | Maricopa County | 33 mi |
| Sun Lakes | Maricopa County | 20 mi |
Moving across the metro or out of state? See all our Phoenix services or get a quote.
Most Phoenix jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Phoenix crew.
industrial rigging in Phoenix →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Phoenix as one accountable job.
machinery moving in Phoenix →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Phoenix.
CNC machine movers in Phoenix →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Phoenix plants.
Phoenix plant & factory relocation →In Phoenix we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Phoenix.
The same Phoenix crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Phoenix: chiller and HVAC rigging, transformer and generator rigging, MRI and medical equipment rigging, lab equipment moving, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Phoenix Heavy Lift Quote