A chiller in a Phoenix building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the Phoenix metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in Phoenix, AZ and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across Phoenix and nearby Arizona metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In Phoenix, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in Phoenix is concentrated in campuses that run around the clock. The metro's hospitals — Mayo Clinic Arizona, Banner University Medical Center Phoenix, and HonorHealth — replace chillers and boilers without ever closing a wing. Arizona State University and TSMC Arizona fab, north Phoenix run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
Phoenix, AZ runs on semiconductor fabs & construction, and almost none of it stays put. Same crews and the same chiller and HVAC rigging standards across the region:
Downtown and Camelback Corridor towers, ASU and hospital campuses, semiconductor fabs, and Sky Harbor Airport carry heavy cooling plant sized for desert loads. The equipment we rig for them includes:
On the industrial side, Phoenix's plants are newer large single-storey clear-span industrial and cleanroom buildings concentrated in the West Valley and Chandler, built with wide bays for semiconductor and logistics floor plans, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the TSMC campus corridor along I-17 in north Phoenix, the Intel Ocotillo campus in Chandler, and the West Valley industrial belt around Goodyear and Glendale.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the Phoenix metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the Phoenix metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the Phoenix metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the Phoenix metro.
Plenty of Phoenix jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-17 and I-40, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in Phoenix. Chandler / Mesa data center submarket and CyrusOne Chandler campus run chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in Phoenix, AZ is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Phoenix jobs. For bigger moves we walk both sites before we price anything.
The same Phoenix crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Phoenix? See truck dispatch for fleets of 4+ trucks.
Working throughout Phoenix, AZ and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout Phoenix and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Mesa | Maricopa County | 15 mi |
| Chandler | Maricopa County | 17 mi |
| Glendale | Maricopa County | 9 mi |
| Tempe | Maricopa County | 10 mi |
| Scottsdale | Maricopa County | 11 mi |
| Gilbert | Maricopa County | 18 mi |
| Peoria | Maricopa County | 13 mi |
| Surprise | Maricopa County | 20 mi |
| Goodyear | Maricopa County | 16 mi |
| Buckeye | Maricopa County | 30 mi |
| Casa Grande | Pinal County | 43 mi |
| Tempe Junction | Maricopa County | 8 mi |
| San Tan Valley | Pinal County | 36 mi |
| Avondale | Maricopa County | 16 mi |
| Maricopa | Pinal County | 27 mi |
| Apache Junction | Pinal County | 30 mi |
| Sun City | Maricopa County | 15 mi |
| Queen Creek | Maricopa County | 29 mi |
| El Mirage | Maricopa County | 18 mi |
| Florence | Pinal County | 49 mi |
| Sun City West | Maricopa County | 21 mi |
| Fountain Hills | Maricopa County | 23 mi |
| New River | Maricopa County | 33 mi |
| Sun Lakes | Maricopa County | 20 mi |
Moving across the metro or out of state? See all our Phoenix services or get a quote.
Most Phoenix jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Phoenix crew.
industrial rigging in Phoenix →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Phoenix as one accountable job.
machinery moving in Phoenix →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Phoenix.
CNC machine movers in Phoenix →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Phoenix plants.
Phoenix plant & factory relocation →In Phoenix we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Phoenix.
The same Phoenix crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Phoenix: heavy lift rigging, transformer and generator rigging, MRI and medical equipment rigging, lab equipment moving, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Phoenix Chiller Rigging Quote