Inside a Boise plant there is usually no room for a crane — a roof overhead, live equipment either side, and a floor that has to carry the load the whole way. That is where heavy lift rigging takes over: hydraulic gantries, jacks and cribbing, and skid tracks that move the heaviest pieces in the building without a hook.
Quick answer: Badass Logistics provides heavy lift rigging in Boise, ID and the surrounding metro. We lift, jack, skid, and set heavy equipment with hydraulic gantries, jacking and cribbing, and skid systems — the methods for loads a crane can't reach, can't set up beside, or isn't allowed inside. Our crews work across Boise and nearby Idaho metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A crane needs open sky, outrigger space, and ground that can take the bearing. Most heavy equipment in Boise sits where none of that exists — under a bay roof, in a pit, behind a column line, or in a building the load has to roll into. In Boise's semiconductor & manufacturing plants, the way a heavy piece moves is usually up a few inches, along a planned path, and down onto its set point.
Badass Logistics plans those lifts from the load data out: weight and center of gravity, the lift points the builder allows, floor capacity along the route, and the headroom at every stage. We set hydraulic gantries where the piece has to go up, jack and crib it where it has to come off a truck or a foundation, and skid or roll it where it has to travel. When there is room for a crane, the crane lift and the inside move go into one plan. Jacking and skidding, explained →
The buildings decide the method in Boise. The stock here is a mix of large single-storey high-clearance semiconductor fabrication buildings on the Micron campus and older low-rise food-processing and warehouse buildings along the rail corridor, which is why so many heavy pieces move under a gantry or on skid track rather than on a hook. The heaviest loads in the metro are semiconductor wafer-fabrication and cleanroom equipment, food processing and freezing equipment, grain and potato handling conveyors, and wood products manufacturing equipment — each one planned from its weight, lift points, and the floor under it.
Boise, ID runs on semiconductor & manufacturing, and almost none of it stays put. Same crews and the same heavy lift rigging standards across the region:
The loads that need these methods are the heaviest and most awkward in the building. Typical Boise heavy lifts include:
That equipment serves Boise's semiconductor memory-chip manufacturing, potato and frozen-food processing, and wood products and building-materials manufacturing, where a lift usually happens beside machinery that keeps running. Most of our jacking and gantry work here lands in the Micron Technology semiconductor campus on the city's southeast side and the Nampa rail-served industrial corridor along Union Pacific's Boise Branch.
Loads lifted and traversed under roofs and inside bays where a crane cannot set up across the Boise metro.
Heavy pieces raised off trailers, foundations, and pits in controlled stages across the Boise metro.
Loads moved along engineered skid tracks or on rollers to the set point across the Boise metro.
Equipment lowered onto anchors, soleplates, and foundations to the layout across the Boise metro.
Plenty of Boise jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-84, I-86 and I-15, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every heavy lift rigging job in Boise, ID is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Boise jobs. For bigger moves we walk both sites before we price anything.
The same Boise crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Boise? See truck dispatch for fleets of 4+ trucks.
Working throughout Boise, ID and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Heavy Lift Rigging throughout Boise and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Nampa | Canyon County | 19 mi |
| Meridian | Ada County | 9 mi |
| Caldwell | Canyon County | 24 mi |
| Eagle | Ada County | 9 mi |
| Garden City | Ada County | 2 mi |
| Kuna | Ada County | 14 mi |
| Mountain Home | Elmore County | 42 mi |
| Star | Ada County | 16 mi |
| Emmett | Gem County | 23 mi |
| Eagle Foothills | Ada County | 13 mi |
| Ontario, OR | Malheur County | 47 mi |
Moving across the metro or out of state? See all our Boise services or get a quote.
Most Boise jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Boise crew.
Boise riggers →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Boise as one accountable job.
Boise machinery moving company →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Boise.
Boise CNC movers →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Boise plants.
plant relocation in Boise →In Boise we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Boise.
The same Boise crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Boise Heavy Lift Quote