Every hour a Spokane production floor sits idle costs money. From manufacturing plants to job shops, we rig, haul, and set industrial machinery across the Spokane metro — one accountable crew from disconnect to re-level, built to get your line back up on schedule.
Quick answer: Badass Logistics provides machinery moving in Spokane, WA and the surrounding metro. We disconnect, rig, haul, and re-level presses, generators, compressors, and full production lines as one accountable job. Our crews work across Spokane and nearby Washington metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Most machinery moves fail in the gaps — the rigger who only lifts, the carrier who only drives, the installer who shows up to a machine that was moved wrong. Across Spokane's mining & manufacturing base, Badass Logistics closes those gaps by running rigging, transport, and reinstallation as one job with one crew.
Presses, generators, compressors, production lines, a single machine between bays or a full plant relocation — we plan it on paper first, move it on air skates and air-ride, and set and level it to spec at the new floor. Moving to another facility? It runs as project freight inside the same plan — no hand-off.
The machinery work in Spokane is concentrated where the floor space is — the West Plains industrial area near Spokane International Airport, the Spokane Valley industrial corridor between Interstate 90 and State Route 290, and the Spokane Business & Industrial Park in Spokane Valley. What sits inside follows what the metro actually builds: medical and dental equipment manufacturing, wood and paper products manufacturing, metals fabrication and machining, aerospace component manufacturing, and food and agribusiness processing. The buildings are a mix of new clear-span warehouse buildings recently built on the West Plains and older postwar single-storey industrial buildings in the Spokane Valley corridor, and that is usually what decides whether a machine rolls out through a dock door on skates or has to come apart on the floor first.
Spokane, WA runs on mining & manufacturing, and almost none of it stays put. Same crews and the same machinery moving standards across the region:
Spokane's industrial base — mining & manufacturing — runs on equipment that doesn't move like freight. Keeping the rest of production running while machines move is usually the hardest part of the plan. Typical machinery moves for Spokane customers include:
On Spokane floors that most often means CNC machining centers, medical and dental device assembly equipment, wood processing and planing equipment, metal fabrication and welding equipment, and aerospace tooling and fixtures — each with its own lift points, its own disconnect list, and its own reason it can't be handled like palletised freight.
Stamping presses, press brakes, shears, and injection molding machines across the Spokane metro.
Generator sets, compressors, switchgear, and plant utilities across the Spokane metro.
VMCs, lathes, and machining centers — see CNC moving across the Spokane metro.
Full lines and multi-machine cells, sequenced around production across the Spokane metro.
Plenty of Spokane jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-5, I-90 and I-82, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Served by BNSF Railway and Union Pacific, both running mainlines through the Spokane Valley industrial corridor with local spur access. With I-5, I-90 and I-82 carrying the over-the-road legs, a machine leaving a Spokane plant has more than one viable routing — and the crating and load plan get built around whichever one it is, not the other way round.
Every machinery moving job in Spokane, WA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Spokane jobs. For bigger moves we walk both sites before we price anything.
The same Spokane crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Spokane? See truck dispatch for fleets of 4+ trucks.
Working throughout Spokane, WA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Machinery Moving throughout Spokane and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Spokane Valley | Spokane County | 9 mi |
| Liberty Lake | Spokane County | 15 mi |
| Cheney | Spokane County | 14 mi |
| Airway Heights | Spokane County | 8 mi |
| Deer Park | Spokane County | 21 mi |
| Post Falls, ID | Kootenai County | 23 mi |
| Coeur d'Alene, ID | Kootenai County | 30 mi |
| Medical Lake | Spokane County | 13 mi |
| Hayden, ID | Kootenai County | 31 mi |
Moving across the metro or out of state? See all our Spokane services, Machinery Movers across Washington or get a quote.
We run machinery moving in metros across Washington — pick the nearest crew:
Most Spokane jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Spokane crew.
Spokane industrial rigging →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Spokane.
Spokane CNC machine moving →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Spokane plants.
factory relocation in Spokane →In Spokane we also run riggers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Spokane.
The same Spokane crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Spokane: heavy lift rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Spokane Machinery Quote