Finding a crane in Spokane is the easy part. The hard part is the lift plan, the rigging, the ground under the outriggers, and the crew that signals the pick. We plan and rig crane lifts across the Spokane metro from start to finish — and bring in the right crane for the load, the radius, and the site.
Quick answer: Badass Logistics provides crane & rigging services in Spokane, WA and the surrounding metro. We plan the lift, bring in the crane sized to the load, radius, and site, and rig, signal, and set the pick with our own crew. Our crews work across Spokane and nearby Washington metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A crane rental gets you a machine and an operator. It does not get you the load weight and center of gravity, the rigging that attaches to the right points, the ground-bearing check under the outriggers, the street or site closure, or the crew that takes the load off the hook and moves it into the building. On Spokane's mining & manufacturing jobs, those are the parts that decide whether a pick goes to plan.
Badass Logistics owns the lift, not just the hook time. We size the crane to the load and radius, write the lift plan, rig and signal the pick, and set the load — and where the crane can only reach the door or the dock, the same crew takes it the rest of the way with jacks, skates, and gantries. Crane rental vs a rigging company →
Crane work in Spokane, WA concentrates in the West Plains industrial area near Spokane International Airport, the Spokane Valley industrial corridor between Interstate 90 and State Route 290, and the Spokane Business & Industrial Park in Spokane Valley, and each of those sets up differently — lot space for outriggers, overhead lines, rail spurs, and neighbors that can't be shut down. The buildings are a mix of new clear-span warehouse buildings recently built on the West Plains and older postwar single-storey industrial buildings in the Spokane Valley corridor, which usually decides whether the crane sets the load inside through a roof opening or at the door for the crew to skate in.
Spokane, WA runs on mining & manufacturing, and almost none of it stays put. Same crews and the same crane and rigging services standards across the region:
Spokane's industrial base — mining & manufacturing — runs on equipment that doesn't move like freight. Keeping the rest of production running while machines move is usually the hardest part of the plan. Typical crane lifts for Spokane customers include:
The picks that come up most in Spokane are CNC machining centers, medical and dental device assembly equipment, wood processing and planing equipment, metal fabrication and welding equipment, and aerospace tooling and fixtures — and the crane is sized to the heaviest of them at the longest radius the site forces, not to the weight alone. Who is asking changes the plan as much as what is being lifted: a pick for Spokane's medical and dental equipment manufacturing, wood and paper products manufacturing, metals fabrication and machining, aerospace component manufacturing, or food and agribusiness processing usually lands inside a running site, so the lift window, the exclusion zone, and the traffic plan are written around their operation.
RTUs, chillers, cooling towers, and mechanical equipment picked onto roofs across the Spokane metro.
Presses and production equipment lifted on and off trucks or into buildings across the Spokane metro.
Close-to-capacity, high-value, and two-crane picks with detailed plans across the Spokane metro.
Tanks, vessels, generators, and skids placed on foundations and pads across the Spokane metro.
Plenty of Spokane jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-5, I-90 and I-82, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every crane & rigging services job in Spokane, WA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Spokane jobs. For bigger moves we walk both sites before we price anything.
The same Spokane crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Spokane? See truck dispatch for fleets of 4+ trucks.
Working throughout Spokane, WA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Crane & Rigging Services throughout Spokane and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Spokane Valley | Spokane County | 9 mi |
| Liberty Lake | Spokane County | 15 mi |
| Cheney | Spokane County | 14 mi |
| Airway Heights | Spokane County | 8 mi |
| Deer Park | Spokane County | 21 mi |
| Post Falls, ID | Kootenai County | 23 mi |
| Coeur d'Alene, ID | Kootenai County | 30 mi |
| Medical Lake | Spokane County | 13 mi |
| Hayden, ID | Kootenai County | 31 mi |
Moving across the metro or out of state? See all our Spokane services, Crane & Rigging Services across Washington or get a quote.
We run crane & rigging services in metros across Washington — pick the nearest crew:
Most Spokane jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Spokane crew.
Spokane industrial rigging →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Spokane as one accountable job.
Spokane machinery movers →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Spokane.
Spokane CNC machine moving →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Spokane plants.
factory relocation in Spokane →In Spokane we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Spokane.
The same Spokane crew also handles millwright services, machinery removal, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Spokane Crane Lift Quote