A chiller in a San Antonio building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the San Antonio metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in San Antonio, TX and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across San Antonio and nearby Texas metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In San Antonio, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in San Antonio is concentrated in campuses that run around the clock. The metro's hospitals — UT Health San Antonio, University Health, and Methodist Healthcare — replace chillers and boilers without ever closing a wing. Southwest Research Institute and Texas Biomedical Research Institute run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
Plenty of San Antonio, TX work — manufacturing & Eagle Ford energy — moves across state lines before it lands. We run the same chiller and HVAC rigging crews through these TX and regional markets:
The South Texas Medical Center district, Joint Base San Antonio installations, the downtown River Walk hotels and convention center, and San Antonio International carry the large HVAC plant. The equipment we rig for them includes:
On the industrial side, San Antonio's plants are a mix of large clear-span automotive assembly and stamping buildings on the far south side and older single-storey hangar and shop buildings at the former Kelly Air Force Base now part of Port San Antonio, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the Port San Antonio campus and East Kelly Railport on the city's south side, the automotive assembly and stamping campus on the far south side, and the Interstate 10/Interstate 35 interchange industrial corridor.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the San Antonio metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the San Antonio metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the San Antonio metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the San Antonio metro.
Plenty of San Antonio jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-20, I-35 and I-45, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in San Antonio. Microsoft San Antonio (Westover Hills) and CyrusOne San Antonio run chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in San Antonio, TX is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller San Antonio jobs. For bigger moves we walk both sites before we price anything.
The same San Antonio crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of San Antonio? See truck dispatch for fleets of 4+ trucks.
Working throughout San Antonio, TX and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout San Antonio and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| New Braunfels | Comal County | 29 mi |
| Schertz | Guadalupe County | 16 mi |
| Converse | Bexar County | 13 mi |
| Seguin | Guadalupe County | 33 mi |
| Boerne | Kendall County | 29 mi |
| Universal City | Bexar County | 15 mi |
| Cibolo | Guadalupe County | 19 mi |
| Floresville | Wilson County | 29 mi |
| Pleasanton | Atascosa County | 32 mi |
| San Marcos | Hays County | 46 mi |
| Canyon Lake | Comal County | 34 mi |
| Live Oak | Bexar County | 14 mi |
| Timberwood Park | Bexar County | 19 mi |
| Hondo | Medina County | 39 mi |
| Selma | Bexar County | 16 mi |
Moving across the metro or out of state? See all our San Antonio services, Chiller & HVAC Rigging across Texas or get a quote.
We run chiller, boiler & HVAC rigging in metros across Texas — pick the nearest crew:
Most San Antonio jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same San Antonio crew.
San Antonio riggers →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across San Antonio as one accountable job.
San Antonio machinery moving company →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in San Antonio.
San Antonio CNC movers →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for San Antonio plants.
plant relocation in San Antonio →In San Antonio we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in San Antonio.
The same San Antonio crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in San Antonio: heavy lift rigging, transformer and generator rigging, MRI and medical equipment rigging, lab equipment moving, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a San Antonio Chiller Rigging Quote