A chiller in a New Orleans building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the New Orleans metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in New Orleans, LA and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across New Orleans and nearby Louisiana metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In New Orleans, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in New Orleans is concentrated in campuses that run around the clock. The metro's hospitals — Ochsner Medical Center, University Medical Center New Orleans, and Tulane Medical Center — replace chillers and boilers without ever closing a wing. Tulane University and LSU Health New Orleans run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
New Orleans, LA runs on port project cargo & energy, and almost none of it stays put. Same crews and the same chiller and HVAC rigging standards across the region:
The Caesars Superdome, Harrah's/Caesars New Orleans casino, CBD office and hotel towers, the medical district and Louis Armstrong International carry the large HVAC plant. The equipment we rig for them includes:
On the industrial side, New Orleans's plants are a mix of century-old riverfront wharf warehouses with rail spurs and elevated dock platforms against flooding, and newer single-storey pre-engineered buildings in the eastern industrial corridor, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the Michoud industrial corridor in New Orleans East, anchored by NASA's Michoud Assembly Facility, the Almonaster Avenue industrial corridor near the Inner Harbor Navigation Canal, the Chalmette refining district downriver in St. Bernard Parish, and the Napoleon Avenue container terminal district along the Mississippi River.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the New Orleans metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the New Orleans metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the New Orleans metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the New Orleans metro.
Plenty of New Orleans jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-12, I-20 and I-49, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in New Orleans. Cogent 650 Poydras and EdgeConneX New Orleans run chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in New Orleans, LA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller New Orleans jobs. For bigger moves we walk both sites before we price anything.
The same New Orleans crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of New Orleans? See truck dispatch for fleets of 4+ trucks.
Working throughout New Orleans, LA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout New Orleans and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Metairie | Jefferson Parish County | 5 mi |
| Kenner | Jefferson Parish County | 10 mi |
| Gretna | Jefferson Parish County | 3 mi |
| Marrero | Jefferson Parish County | 4 mi |
| Chalmette | Saint Bernard Parish County | 7 mi |
| Harvey | Jefferson Parish County | 4 mi |
| Slidell | Saint Tammany Parish County | 28 mi |
| LaPlace, IL | Piatt County | 685 mi |
| Houma | Terrebonne Parish County | 46 mi |
| Boutte | Saint Charles Parish County | 19 mi |
| Laplace | Saint John the Baptist Parish County | 26 mi |
| Terrytown | Jefferson Parish County | 4 mi |
| Hammond | Tangipahoa Parish County | 45 mi |
| Bayou Cane | Terrebonne Parish County | 47 mi |
| Estelle | Jefferson Parish County | 8 mi |
| Thibodaux | Lafourche Parish County | 46 mi |
| Bayou Boeuf | Lafourche Parish County | 32 mi |
| Grand Bayou Mobile Home Park | Lafourche Parish County | 42 mi |
| River Ridge | Jefferson Parish County | 8 mi |
| Belle Chasse | Plaquemines Parish County | 9 mi |
| Mandeville | Saint Tammany Parish County | 28 mi |
| Luling | Saint Charles Parish County | 18 mi |
| Woodmere | Jefferson Parish County | 7 mi |
| Destrehan | Saint Charles Parish County | 17 mi |
Moving across the metro or out of state? See all our New Orleans services or get a quote.
Most New Orleans jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same New Orleans crew.
rigging contractors in New Orleans →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across New Orleans as one accountable job.
industrial machinery movers in New Orleans →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in New Orleans.
machine tool movers in New Orleans →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for New Orleans plants.
New Orleans plant relocation →In New Orleans we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in New Orleans.
The same New Orleans crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in New Orleans: heavy lift rigging, transformer and generator rigging, and MRI and medical equipment rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a New Orleans Chiller Rigging Quote