A chiller in a Boston building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the Boston metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in Boston, MA and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across Boston and nearby Massachusetts metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In Boston, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in Boston is concentrated in campuses that run around the clock. The metro's hospitals — Mass General Brigham, Beth Israel Deaconess Medical Center, and Boston Children's Hospital — replace chillers and boilers without ever closing a wing. MIT and Harvard University run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
Boston, MA runs on manufacturing & port, and almost none of it stays put. Same crews and the same chiller and HVAC rigging standards across the region:
Financial District towers, the Longwood Medical Area, Kendall Square lab buildings and Logan Airport carry heavy chiller and lab-exhaust plant. The equipment we rig for them includes:
On the industrial side, Boston's plants are a mix of dense multi-storey brick mill buildings in Chelsea and Everett with narrow loading bays and older waterfront warehouses with low dock clearances, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the Chelsea and Everett industrial district south of Route 16, anchored by the New England Produce Center, the Grand Junction Railroad corridor linking Allston, Cambridge, Charlestown, Everett and Chelsea, and the Conley Terminal container-port district in South Boston.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the Boston metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the Boston metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the Boston metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the Boston metro.
Plenty of Boston jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-90, I-95 and I-93, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in Boston. Markley One Summer Street runs chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in Boston, MA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Boston jobs. For bigger moves we walk both sites before we price anything.
The same Boston crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Boston? See truck dispatch for fleets of 4+ trucks.
Working throughout Boston, MA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout Boston and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Cambridge | Middlesex County | 3 mi |
| Quincy | Norfolk County | 8 mi |
| Worcester | Worcester County | 39 mi |
| Lowell | Middlesex County | 23 mi |
| Framingham | Middlesex County | 19 mi |
| Braintree | Norfolk County | 11 mi |
| Woburn | Middlesex County | 10 mi |
| Everett | Middlesex County | 4 mi |
| Chelsea | Suffolk County | 3 mi |
| Waltham | Middlesex County | 9 mi |
| Providence, RI | Providence County | 41 mi |
| Manchester, NH | Hillsborough County | 48 mi |
| Dorchester | Suffolk County | 4 mi |
| Brockton | Plymouth County | 19 mi |
| Fall River | Bristol County | 46 mi |
| Lynn | Essex County | 9 mi |
| Newton | Middlesex County | 8 mi |
| Nashua, NH | Hillsborough County | 35 mi |
| Warwick, RI | Kent County | 49 mi |
| Cranston, RI | Providence County | 44 mi |
| Somerville | Middlesex County | 3 mi |
| Lawrence | Essex County | 25 mi |
| Pawtucket, RI | Providence County | 37 mi |
| Framingham Center | Middlesex County | 20 mi |
Moving across the metro or out of state? See all our Boston services or get a quote.
Most Boston jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Boston crew.
Boston industrial rigging →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Boston as one accountable job.
Boston machinery movers →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Boston.
Boston CNC machine moving →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Boston plants.
factory relocation in Boston →In Boston we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Boston.
The same Boston crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Boston: heavy lift rigging, MRI and medical equipment rigging, and printing press moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Boston Chiller Rigging Quote