A chiller in a Baltimore building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the Baltimore metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in Baltimore, MD and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across Baltimore and nearby Maryland metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In Baltimore, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in Baltimore is concentrated in campuses that run around the clock. The metro's hospitals — Johns Hopkins Hospital, University of Maryland Medical Center, and MedStar Union Memorial Hospital — replace chillers and boilers without ever closing a wing. Johns Hopkins University and Johns Hopkins APL (Laurel) run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
Baltimore, MD runs on port breakbulk & industrial, and almost none of it stays put. Same crews and the same chiller and HVAC rigging standards across the region:
The Johns Hopkins and University of Maryland medical campuses, Inner Harbor towers, Horseshoe Casino Baltimore and BWI Marshall Airport carry the large central plant. The equipment we rig for them includes:
On the industrial side, Baltimore's plants are large former heavy-industrial buildings at the Sparrows Point site now repurposed into big-box distribution space, alongside older chemical and petroleum tank farms in Fairfield and Curtis Bay, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the Tradepoint Atlantic complex at Sparrows Point, the Fairfield and Curtis Bay chemical and petroleum district, and the Dundalk Marine Terminal port district.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the Baltimore metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the Baltimore metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the Baltimore metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the Baltimore metro.
Plenty of Baltimore jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-95, I-70 and I-83, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in Baltimore. Expedient Baltimore Tide Point and TierPoint BWI run chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in Baltimore, MD is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Baltimore jobs. For bigger moves we walk both sites before we price anything.
The same Baltimore crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Baltimore? See truck dispatch for fleets of 4+ trucks.
Working throughout Baltimore, MD and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout Baltimore and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Towson | Baltimore County | 8 mi |
| Dundalk | Baltimore County | 6 mi |
| Glen Burnie | Anne Arundel County | 9 mi |
| Columbia | Howard County | 13 mi |
| Essex | Baltimore County | 8 mi |
| Catonsville | Baltimore County | 7 mi |
| Curtis Bay | City of Baltimore County | 5 mi |
| Sparrows Point | Baltimore County | 9 mi |
| Annapolis | Anne Arundel County | 23 mi |
| Washington, DC | — | 36 mi |
| Arlington, VA | Arlington County | 39 mi |
| Alexandria, VA | City of Alexandria County | 41 mi |
| Germantown | Montgomery County | 36 mi |
| Silver Spring | Montgomery County | 30 mi |
| Frederick | Frederick County | 44 mi |
| Waldorf | Charles County | 49 mi |
| Gaithersburg | Montgomery County | 33 mi |
| Rockville | Montgomery County | 32 mi |
| Ellicott City | Howard County | 10 mi |
| Bethesda | Montgomery County | 34 mi |
| Reston, VA | Fairfax County | 45 mi |
| Bowie | Prince George's County | 25 mi |
| Downtown DC, DC | — | 35 mi |
| Aspen Hill | Montgomery County | 29 mi |
Moving across the metro or out of state? See all our Baltimore services or get a quote.
Most Baltimore jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Baltimore crew.
rigging contractors in Baltimore →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Baltimore as one accountable job.
industrial machinery movers in Baltimore →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Baltimore.
machine tool movers in Baltimore →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Baltimore plants.
Baltimore plant relocation →In Baltimore we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Baltimore.
The same Baltimore crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Baltimore: heavy lift rigging, transformer and generator rigging, MRI and medical equipment rigging, and lab equipment moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Baltimore Chiller Rigging Quote