An MRI magnet is one of the heaviest single pieces a St. Louis hospital will ever bring through its doors — and it has to arrive without a scratch, inside a building that never closes. We plan the route, rig the magnet and its components, and set them for the OEM's install team across the St. Louis metro.
Quick answer: Badass Logistics provides MRI & medical equipment rigging in St. Louis, MO and the surrounding metro. We rig MRI magnets, CT, PET/CT, cath lab, and linac components into and out of hospitals and imaging centers — on planned routes, with tilt and shock monitoring, sequenced around the OEM's install team. Our crews work across St. Louis and nearby Missouri metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Imaging equipment does not move like freight. A magnet has strict tilt and shock limits, a CT gantry carries delicate rotating components, and the route runs through corridors, elevators, and floors that were built for patients. In St. Louis's hospitals and imaging centers, the move is also planned around infection control and a schedule that keeps clinical areas open.
Badass Logistics plans the route from the truck to the suite — rated elevator, wall or knockout opening, or a crane pick to an upper floor — and checks floor loading at every stage. Magnet ramp-down, cryogens, and calibration stay with the OEM; we rig and set what they hand us, with monitoring recorded throughout. How to move an MRI machine →
St. Louis's imaging work is anchored by its health systems — Barnes-Jewish Hospital (BJC), Washington University Medical Center, SSM Health Saint Louis University Hospital, and Mercy Hospital St. Louis — and by the outpatient imaging centers that ring them. Each of them replaces scanners on a cycle, and each replacement means a magnet out, a magnet in, and a suite that has to reopen on a date.
St. Louis, MO runs on manufacturing & Mississippi barge corridor, and almost none of it stays put. Same crews and the same MRI and medical equipment rigging standards across the region:
Hospital imaging departments, outpatient imaging centers, and cancer centers across St. Louis replace equipment on a steady cycle. The equipment we rig for them includes:
The buildings set the route. Downtown towers, the WashU/BJC medical campus, SLU, and Lambert International Airport carry large central plant, and an imaging suite in any of them can sit on an upper floor, in a basement, or behind a corridor that was never built for a magnet.
Magnets rigged in, out, and between suites with tilt and shock monitoring across the St. Louis metro.
Gantries, tables, and cabinets moved and set for the install team across the St. Louis metro.
C-arms, ceiling mounts, and components handled as one sequenced job across the St. Louis metro.
Linac components rigged into vaults on planned routes across the St. Louis metro.
Plenty of St. Louis jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-70, I-44, I-35 and I-29, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Research imaging adds a second kind of job. Washington University in St. Louis, Donald Danforth Plant Science Center, and Cortex Innovation Community run scanners and instruments outside the clinical schedule, often in older research buildings where the route has to be engineered around floors that were never rated for a magnet.
Every MRI & medical equipment rigging job in St. Louis, MO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller St. Louis jobs. For bigger moves we walk both sites before we price anything.
The same St. Louis crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of St. Louis? See truck dispatch for fleets of 4+ trucks.
Working throughout St. Louis, MO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
MRI & Medical Equipment Rigging throughout St. Louis and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| St. Charles, IL | Kane County | 248 mi |
| Chesterfield | Saint Louis County | 21 mi |
| Florissant | Saint Louis County | 13 mi |
| O'Fallon | Saint Charles County | 30 mi |
| Earth City | Saint Louis County | 18 mi |
| Hazelwood | Saint Louis County | 14 mi |
| Wentzville | Saint Charles County | 38 mi |
| Fenton | Saint Louis County | 15 mi |
| Granite City, IL | Madison County | 6 mi |
| Saint Charles | Saint Charles County | 19 mi |
| Saint Peters | Saint Charles County | 26 mi |
| Belleville, IL | Saint Clair County | 14 mi |
| Oakville | Saint Louis County | 12 mi |
| Wildwood | Saint Louis County | 25 mi |
| University City | Saint Louis County | 6 mi |
| Ballwin | Saint Louis County | 19 mi |
| Upper Alton, IL | Madison County | 20 mi |
| O'Fallon, IL | Saint Clair County | 16 mi |
| Mehlville | Saint Louis County | 11 mi |
| Kirkwood | Saint Louis County | 12 mi |
| Maryland Heights | Saint Louis County | 14 mi |
| East Saint Louis, IL | Saint Clair County | 3 mi |
| Alton, IL | Madison County | 18 mi |
| Edwardsville, IL | Madison County | 18 mi |
Moving across the metro or out of state? See all our St. Louis services, MRI & Medical Equipment Rigging across Missouri or get a quote.
We run MRI & medical equipment rigging in metros across Missouri — pick the nearest crew:
Most St. Louis jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same St. Louis crew.
industrial rigging in St. Louis →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across St. Louis as one accountable job.
machinery moving in St. Louis →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in St. Louis.
CNC machine movers in St. Louis →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for St. Louis plants.
St. Louis plant & factory relocation →In St. Louis we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in St. Louis.
The same St. Louis crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in St. Louis: heavy lift rigging, chiller and HVAC rigging, transformer and generator rigging, and lab equipment moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a St. Louis MRI Rigging Quote