A chiller in a St. Louis building was usually set before the walls closed around it. Getting the old one out and the new one in means a route through a mechanical room, a basement, or a roof — and often a crane on a city street. We plan and rig HVAC equipment across the St. Louis metro, from the first opening to the last anchor bolt.
Quick answer: Badass Logistics provides chiller, boiler & HVAC rigging in St. Louis, MO and the surrounding metro. We rig chillers, boilers, cooling towers, air handlers, and rooftop units into and out of mechanical rooms, basements, penthouses, and roofs — sectioned where the opening demands it and set ready for the mechanical contractor. Our crews work across St. Louis and nearby Missouri metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
The machine is rarely the hard part of an HVAC replacement. The route is. A centrifugal chiller headed for a basement plant room, a boiler that only fits through a wall, a cooling tower that has to go up past occupied floors — the plan is set by doors, corridors, slab capacity, and crane reach long before it is set by the unit. In St. Louis, much of that work is in buildings that cannot shut down while it happens.
Badass Logistics walks both routes — the old unit's way out and the new unit's way in — and rigs them as one job. Refrigerant recovery, electrical disconnects, and piping stay with your licensed mechanical contractor; we sequence around them. Units are skated, jacked, or sectioned at factory joints where the builder allows it, and roof work runs as a planned crane lift. How to move a boiler or chiller →
Large HVAC plant in St. Louis is concentrated in campuses that run around the clock. The metro's hospitals — Barnes-Jewish Hospital (BJC), Washington University Medical Center, and SSM Health Saint Louis University Hospital — replace chillers and boilers without ever closing a wing. Washington University in St. Louis and Donald Danforth Plant Science Center run central plants of their own, often in basements reached by one freight elevator or a single knockout wall.
Chiller and HVAC rigging is a specialist service, so we run it where the sector is concentrated. Outside St. Louis, the largest of those markets are:
Downtown towers, the WashU/BJC medical campus, SLU, and Lambert International Airport carry large central plant. The equipment we rig for them includes:
On the industrial side, St. Louis's plants are large single-storey aerospace and automotive assembly plants alongside older multi-storey brick industrial buildings near the riverfront with tighter dock access, and process cooling there means chillers, towers, and air handlers set on mezzanines and roofs. That work concentrates in the Earth City Industrial area near the Missouri River, America's Central Port and River's Edge Business Park in Granite City, Illinois, the Kelsey Business & Technology Park, and the St. Louis riverfront port district along the Mississippi.
Centrifugal, screw, and absorption chillers rigged out of and into plant rooms across the St. Louis metro.
Fire-tube and water-tube boilers removed and set, sectioned where the opening demands it across the St. Louis metro.
RTUs, cooling towers, and condensers lifted onto and off roofs across the St. Louis metro.
AHUs and fan sections moved through buildings and set on curbs and pads across the St. Louis metro.
Plenty of St. Louis jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-70, I-44, I-35 and I-29, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Data centers are the other big buyer of cooling plant in St. Louis. Netrality 210 N Tucker and TierPoint St. Louis run chillers, CRAH units, and condensers that are replaced and added on the facility's schedule, not the weather's.
Every chiller, boiler & HVAC rigging job in St. Louis, MO is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller St. Louis jobs. For bigger moves we walk both sites before we price anything.
The same St. Louis crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of St. Louis? See truck dispatch for fleets of 4+ trucks.
Working throughout St. Louis, MO and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Chiller, Boiler & HVAC Rigging throughout St. Louis and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| St. Charles, IL | Kane County | 248 mi |
| Chesterfield | Saint Louis County | 21 mi |
| Florissant | Saint Louis County | 13 mi |
| O'Fallon | Saint Charles County | 30 mi |
| Earth City | Saint Louis County | 18 mi |
| Hazelwood | Saint Louis County | 14 mi |
| Wentzville | Saint Charles County | 38 mi |
| Fenton | Saint Louis County | 15 mi |
| Granite City, IL | Madison County | 6 mi |
| Saint Charles | Saint Charles County | 19 mi |
| Saint Peters | Saint Charles County | 26 mi |
| Belleville, IL | Saint Clair County | 14 mi |
| Oakville | Saint Louis County | 12 mi |
| Wildwood | Saint Louis County | 25 mi |
| University City | Saint Louis County | 6 mi |
| Ballwin | Saint Louis County | 19 mi |
| Upper Alton, IL | Madison County | 20 mi |
| O'Fallon, IL | Saint Clair County | 16 mi |
| Mehlville | Saint Louis County | 11 mi |
| Kirkwood | Saint Louis County | 12 mi |
| Maryland Heights | Saint Louis County | 14 mi |
| East Saint Louis, IL | Saint Clair County | 3 mi |
| Alton, IL | Madison County | 18 mi |
| Edwardsville, IL | Madison County | 18 mi |
Moving across the metro or out of state? See all our St. Louis services or get a quote.
Most St. Louis jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same St. Louis crew.
industrial rigging in St. Louis →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across St. Louis as one accountable job.
machinery moving in St. Louis →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in St. Louis.
CNC machine movers in St. Louis →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for St. Louis plants.
St. Louis plant & factory relocation →In St. Louis we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in St. Louis.
The same St. Louis crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in St. Louis: heavy lift rigging, transformer and generator rigging, MRI and medical equipment rigging, and lab equipment moving.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a St. Louis Chiller Rigging Quote