Getting an old machine out of a Wichita plant is often harder than the day it went in — the building grew around it, the door got smaller, and nobody labeled the utilities. We rig out retired machines, production lines, and whole plants across the Wichita metro, and hand the floor back ready for what comes next.
Quick answer: Badass Logistics provides machinery removal & decommissioning in Wichita, KS and the surrounding metro. We disconnect, rig out, and remove retired machines, production lines, and whole plants — sequenced around buyers, relocation loads, and scrap so the floor is handed back clean. Our crews work across Wichita and nearby Kansas metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Removal is not junk hauling. A machine being sold has to reach its buyer working; one being scrapped still has to come out without damaging the building, the machines staying behind, or the people around it. Across Wichita's aviation manufacturing (Spirit, Textron, Bombardier) base, most removals are one of three things — a single machine being replaced, a line being retired, or a whole floor coming out for a closure or lease exit.
Badass Logistics coordinates lockout with your maintenance team or licensed trades, tags every asset, drains and secures what has to be drained, splits what won't fit the opening, and sequences the load-out so nothing blocks the dock. Resale units are prepped and loaded for the buyer, relocation units run as project freight through our licensed broker and carrier partners, and when the rest of the plant is moving too, it becomes a plant relocation.
Removals in Wichita are decided by the building before the machine. The stock here is large clear-span single-storey aircraft assembly and fabrication hangars built for full fuselage and wing sections — and a door, column line, or mezzanine installed after the machine went in is the most common reason one has to be split to come out. Most of the retired equipment we pull in this metro sits in the aerospace manufacturing district surrounding Wichita Dwight D. Eisenhower National Airport, the Spirit AeroSystems campus, and the Textron Aviation (Cessna and Beechcraft) campus.
Wichita, KS runs on aviation manufacturing (Spirit, Textron, Bombardier), and almost none of it stays put. Same crews and the same machinery removal standards across the region:
Wichita's industrial base — aviation manufacturing (Spirit, Textron, Bombardier) — runs on equipment that doesn't move like freight. Large machine envelopes, documentation expectations, and secure-site access rules shape every move. Typical removal jobs for Wichita customers include:
The units coming out of Wichita plants are usually fuselage and wing assembly jigs, CNC machining centers, autoclaves and composite curing equipment, sheet-metal forming presses, and riveting and structures assembly tooling. Each has its own drain-down, lockout points, and resale value — which is why they are tagged by destination before the first one is disconnected. Removals here track the churn in the metro's aircraft fuselage and structures manufacturing, general aviation and business jet final assembly, aerospace tooling and precision machining, and aerospace composites fabrication: a line retired for a model change, a floor cleared for a consolidation, or a building handed back at lease end.
Presses, machine tools, molding machines, and compressors disconnected and rigged out across the Wichita metro.
Production lines and cells dismantled in sequence, tagged, and removed across the Wichita metro.
Whole-floor removal for closures, consolidations, and lease exits across the Wichita metro.
Machines prepped, protected, and loaded so the buyer receives them working across the Wichita metro.
Plenty of Wichita jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-70, I-35 and I-135, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every machinery removal & decommissioning job in Wichita, KS is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Wichita jobs. For bigger moves we walk both sites before we price anything.
The same Wichita crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Wichita? See truck dispatch for fleets of 4+ trucks.
Working throughout Wichita, KS and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Machinery Removal & Decommissioning throughout Wichita and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Derby | Sedgwick County | 11 mi |
| Andover | Butler County | 11 mi |
| Haysville | Sedgwick County | 9 mi |
| Newton | Harvey County | 25 mi |
| Park City | Sedgwick County | 8 mi |
| Bel Aire | — | — |
| Goddard | Sedgwick County | 13 mi |
| Maize | Sedgwick County | 9 mi |
| Valley Center | Sedgwick County | 10 mi |
| Hutchinson | Reno County | 41 mi |
| El Dorado | Butler County | 27 mi |
| Winfield | Cowley County | 37 mi |
| Arkansas City | Cowley County | 47 mi |
| Augusta | Butler County | 20 mi |
Moving across the metro or out of state? See all our Wichita services or get a quote.
Most Wichita jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Wichita crew.
Wichita riggers →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Wichita as one accountable job.
Wichita machinery moving company →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Wichita.
Wichita CNC movers →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Wichita plants.
plant relocation in Wichita →In Wichita we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Wichita.
The same Wichita crew also handles millwright services and crane and rigging services.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Wichita Removal Quote