Getting an old machine out of a Midland plant is often harder than the day it went in — the building grew around it, the door got smaller, and nobody labeled the utilities. We rig out retired machines, production lines, and whole plants across the Midland metro, and hand the floor back ready for what comes next.
Quick answer: Badass Logistics provides machinery removal & decommissioning in Midland, TX and the surrounding metro. We disconnect, rig out, and remove retired machines, production lines, and whole plants — sequenced around buyers, relocation loads, and scrap so the floor is handed back clean. Our crews work across Midland and nearby Texas metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
Removal is not junk hauling. A machine being sold has to reach its buyer working; one being scrapped still has to come out without damaging the building, the machines staying behind, or the people around it. Across Midland's Permian Basin oilfield base, most removals are one of three things — a single machine being replaced, a line being retired, or a whole floor coming out for a closure or lease exit.
Badass Logistics coordinates lockout with your maintenance team or licensed trades, tags every asset, drains and secures what has to be drained, splits what won't fit the opening, and sequences the load-out so nothing blocks the dock. Resale units are prepped and loaded for the buyer, relocation units run as project freight through our licensed broker and carrier partners, and when the rest of the plant is moving too, it becomes a plant relocation.
Removals in Midland are decided by the building before the machine. The stock here is dominated by outdoor pipe and equipment laydown yards and pre-engineered metal fabrication shops with overhead bridge cranes for rig components, rather than multi-storey buildings — and a door, column line, or mezzanine installed after the machine went in is the most common reason one has to be split to come out. Most of the retired equipment we pull in this metro sits in the David Mims Business Park along I-20 west of Loop 250 and the Loop 250 industrial strip encircling the city.
Plenty of Midland, TX work — Permian Basin oilfield — moves across state lines before it lands. We run the same machinery removal crews through these TX and regional markets:
Midland's industrial base — Permian Basin oilfield — runs on equipment that doesn't move like freight. Turnaround windows, site safety rules, and heavy concentrated loads on process pads set the schedule. Typical removal jobs for Midland customers include:
The units coming out of Midland plants are usually workover and drilling rig components, pressure pumping units, wellhead and pipe fabrication equipment, and frac sand transload equipment. Each has its own drain-down, lockout points, and resale value — which is why they are tagged by destination before the first one is disconnected. Removals here track the churn in the metro's oilfield equipment manufacturing and repair, pressure pumping and well-completion equipment, drilling rig component fabrication, and frac sand transload and proppant handling: a line retired for a model change, a floor cleared for a consolidation, or a building handed back at lease end.
Presses, machine tools, molding machines, and compressors disconnected and rigged out across the Midland metro.
Production lines and cells dismantled in sequence, tagged, and removed across the Midland metro.
Whole-floor removal for closures, consolidations, and lease exits across the Midland metro.
Machines prepped, protected, and loaded so the buyer receives them working across the Midland metro.
Plenty of Midland jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-20, I-35 and I-45, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every machinery removal & decommissioning job in Midland, TX is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Midland jobs. For bigger moves we walk both sites before we price anything.
The same Midland crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Midland? See truck dispatch for fleets of 4+ trucks.
Working throughout Midland, TX and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Machinery Removal & Decommissioning throughout Midland and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Odessa | Ector County | 20 mi |
| Big Spring | Howard County | 39 mi |
| Andrews | Andrews County | 35 mi |
| Stanton | Martin County | 19 mi |
| Gardendale | Ector County | 18 mi |
| Greenwood | Midland County | 11 mi |
| Crane | Crane County | 44 mi |
| Monahans | Ward County | 55 mi |
| West Odessa | Ector County | 27 mi |
Moving across the metro or out of state? See all our Midland services, Machinery Removal across Texas or get a quote.
We run machinery removal & decommissioning in metros across Texas — pick the nearest crew:
Most Midland jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Midland crew.
Midland riggers →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Midland as one accountable job.
Midland machinery moving company →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Midland.
Midland CNC movers →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Midland plants.
plant relocation in Midland →In Midland we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Midland.
The same Midland crew also handles millwright services, crane and rigging services, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Midland Removal Quote