Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the San Jose metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in San Jose, CA and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across San Jose and nearby California metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around San Jose, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in San Jose follows the grid: PG&E, Silicon Valley Power, and Metcalf Energy Center. Demand has grown with the metro's data center build-out — Santa Clara data-center submarket and Digital Realty Santa Clara — where every hall arrives with its own transformers, gensets, and switchgear. Plants in the metro's semiconductor and electronics manufacturing, biotech and life-sciences manufacturing, advanced manufacturing and precision prototyping, and computer hardware and component assembly add standby power and unit substations on their own schedule.
Plenty of San Jose, CA work — Silicon Valley semiconductor & precision machining — moves across state lines before it lands. We run the same transformer and generator rigging crews through these CA and regional markets:
Utilities, plants, campuses, and data centers across San Jose all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the North San Jose tech corridor of flex-industrial R&D and light-manufacturing buildings and the Edenvale Industrial Park in South San Jose, home to advanced-manufacturing, medical and nanotechnology tenants, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: San Jose's buildings are a mix of flex-industrial R&D and light-manufacturing buildings in the North San Jose tech corridor and newer clean-manufacturing buildings in the Edenvale Industrial Park, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the San Jose metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the San Jose metro.
Switchgear lineups and motor control centers moved into electrical rooms across the San Jose metro.
Units rigged into basement vaults and indoor substations across the San Jose metro.
Plenty of San Jose jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-5, I-10, I-15 and I-80, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every transformer & generator rigging job in San Jose, CA is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller San Jose jobs. For bigger moves we walk both sites before we price anything.
The same San Jose crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of San Jose? See truck dispatch for fleets of 4+ trucks.
Working throughout San Jose, CA and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout San Jose and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Santa Clara | Santa Clara County | 4 mi |
| Sunnyvale | Santa Clara County | 8 mi |
| Milpitas | Santa Clara County | 6 mi |
| Campbell | Santa Clara County | 5 mi |
| Cupertino | Santa Clara County | 8 mi |
| Mountain View | Santa Clara County | 11 mi |
| Fremont | Alameda County | 15 mi |
| Morgan Hill | Santa Clara County | 20 mi |
| Gilroy | Santa Clara County | 29 mi |
| San Francisco | City and County of San Francisco County | 42 mi |
| Oakland | Alameda County | 38 mi |
| Hayward | Alameda County | 25 mi |
| Salinas | Monterey County | 48 mi |
| Concord | Contra Costa County | 45 mi |
| Berkeley | Alameda County | 42 mi |
| Antioch | Contra Costa County | 46 mi |
| Richmond | Contra Costa County | 48 mi |
| Daly City | San Mateo County | 40 mi |
| San Mateo | San Mateo County | 28 mi |
| San Leandro | Alameda County | 30 mi |
| Livermore | Alameda County | 25 mi |
| Tracy | San Joaquin County | 38 mi |
| Redwood City | San Mateo County | 21 mi |
| Pleasanton | Alameda County | 22 mi |
Moving across the metro or out of state? See all our San Jose services, Transformer & Generator Rigging across California or get a quote.
We run transformer & generator rigging in metros across California — pick the nearest crew:
Most San Jose jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same San Jose crew.
industrial rigging in San Jose →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across San Jose as one accountable job.
machinery moving in San Jose →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in San Jose.
CNC machine movers in San Jose →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for San Jose plants.
San Jose plant & factory relocation →In San Jose we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in San Jose.
The same San Jose crew also handles millwright services, machinery removal, and crane and rigging services.
Specialty rigging in San Jose: heavy lift rigging, chiller and HVAC rigging, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a San Jose Transformer Quote