Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the New York metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in New York, NY and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across New York and nearby New York metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around New York, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in New York follows the grid: Con Edison, Ravenswood Generating Station, and New York Power Authority. Demand has grown with the metro's data center build-out — 60 Hudson Street and 111 Eighth Avenue — where every hall arrives with its own transformers, gensets, and switchgear. Plants in the metro's wholesale food distribution, garment cutting and sample production, film and television production, and metal fabrication and structural steel add standby power and unit substations on their own schedule.
New York, NY runs on construction & infrastructure, and almost none of it stays put. Same crews and the same transformer and generator rigging standards across the region:
Utilities, plants, campuses, and data centers across New York all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the Hunts Point Food Distribution Center and industrial park in the South Bronx, the Bush Terminal / Industry City waterfront industrial complex in Sunset Park, Brooklyn, and the Maspeth Industrial Business Zone in western Queens, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: New York's buildings are a mix of early-20th-century multi-storey loft and warehouse buildings with narrow freight elevators and low dock clearances in Sunset Park and Maspeth, alongside single-storey market and cold-storage buildings at Hunts Point, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the New York metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the New York metro.
Switchgear lineups and motor control centers moved into electrical rooms across the New York metro.
Units rigged into basement vaults and indoor substations across the New York metro.
Plenty of New York jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-87, I-90, I-95 and I-81, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Large units for New York often arrive by more than one mode. Served by CSX and Norfolk Southern through the New York New Jersey Rail car-float operation across Upper New York Bay between Jersey City and Brooklyn. The Port of New York and New Jersey is the largest container port on the US East Coast. Wherever the unit comes off, the rigging from that point to the pad is one plan.
Every transformer & generator rigging job in New York, NY is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller New York jobs. For bigger moves we walk both sites before we price anything.
The same New York crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of New York? See truck dispatch for fleets of 4+ trucks.
Working throughout New York, NY and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout New York and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Newark, NJ | Essex County | 9 mi |
| Jersey City, NJ | Hudson County | 4 mi |
| Yonkers | Westchester County | 16 mi |
| Elizabeth, NJ | Union County | 11 mi |
| Brooklyn | Kings County | 5 mi |
| Bronx, ID | Bonner County | 2131 mi |
| Edison, NJ | Middlesex County | 25 mi |
| Secaucus, NJ | Hudson County | 6 mi |
| Bayonne, NJ | Hudson County | 7 mi |
| Long Island City | — | — |
| New York City | — | 0 mi |
| Queens | Queens County | 9 mi |
| Manhattan | New York County | 5 mi |
| The Bronx | Bronx County | 12 mi |
| Staten Island | Richmond County | 13 mi |
| Paterson, NJ | Passaic County | 17 mi |
| Stamford, CT | Western Connecticut Planning Region County | 34 mi |
| North Stamford, CT | Western Connecticut Planning Region County | 38 mi |
| Norwalk, CT | Western Connecticut Planning Region County | 42 mi |
| Greenburgh | Westchester County | 24 mi |
| Clifton, NJ | Passaic County | 13 mi |
| East Norwalk, CT | Western Connecticut Planning Region County | 42 mi |
| New Rochelle | Westchester County | 18 mi |
| Brick, NJ | Ocean County | 46 mi |
Moving across the metro or out of state? See all our New York services or get a quote.
Most New York jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same New York crew.
New York industrial rigging →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across New York as one accountable job.
New York machinery movers →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in New York.
New York CNC machine moving →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for New York plants.
factory relocation in New York →In New York we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in New York.
The same New York crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in New York: heavy lift rigging, chiller and HVAC rigging, MRI and medical equipment rigging, lab equipment moving, printing press moving, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a New York Transformer Quote