Transformers and generators are dense, top-heavy, and set to tight pad layouts. Across the Houston metro we jack them off the trailer, skid or crane them onto the pad, and set them on the anchors — so the electrical contractor gets the unit where the drawings put it.
Quick answer: Badass Logistics provides transformer & generator rigging in Houston, TX and the surrounding metro. We rig, jack, skid, and set transformers, generator sets, and switchgear onto pads, into vaults, and into electrical rooms — with impact recording where the manufacturer requires it. Our crews work across Houston and nearby Texas metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A large power transformer can weigh more than everything else on the site combined, and it is built to sit still. Tilting it past its limit, dropping it on a corner, or skidding it across a pad that wasn't level can damage the core and windings in ways that only show up at energization. Around Houston, that is why the rigging is planned around the manufacturer's lift points, tilt limits, and impact requirements before it is planned around the crane.
Badass Logistics sets pad-mount and substation transformers, standby and prime generator sets, and switchgear lineups. Many of these jobs don't use a crane at all: the unit is jacked off the trailer onto cribbing and skidded onto the pad. Electrical disconnection, oil handling, and testing stay with your electrical contractor and the manufacturer. How to move a transformer into a building →
Transformer and generator work in Houston follows the grid: CenterPoint Energy, ExxonMobil Baytown complex, and Deer Park refinery. Demand has grown with the metro's data center build-out — DataBank Westway Park campus (ex-CyrusOne Houston West) and Switch Houston 2 — where every hall arrives with its own transformers, gensets, and switchgear. Plants in the metro's petrochemical processing, oil and gas equipment fabrication, plastics and resin manufacturing, and industrial valve and pipe fabrication add standby power and unit substations on their own schedule.
Plenty of Houston, TX work — energy & petrochemical, Ship Channel refineries — moves across state lines before it lands. We run the same transformer and generator rigging crews through these TX and regional markets:
Utilities, plants, campuses, and data centers across Houston all run on equipment that has to land exactly where the drawings put it. The units we rig include:
Pad work here lands in the Houston Ship Channel industrial corridor through Pasadena, Deer Park and Galena Park, the Baytown petrochemical complex, and the Jacintoport Industrial District, where trailer access to the pad decides whether the unit is craned or jacked and skidded. Indoor sets are harder: Houston's buildings are heavy industrial process plants and tank farms along the Ship Channel built around fixed piping runs and pipe racks that constrain crane and rigging access, and a unit headed for an electrical room is planned around every door on the way.
Pad-mount and substation transformers jacked, skidded, or craned onto pads across the Houston metro.
Standby and prime gensets set in yards, enclosures, and on roofs across the Houston metro.
Switchgear lineups and motor control centers moved into electrical rooms across the Houston metro.
Units rigged into basement vaults and indoor substations across the Houston metro.
Plenty of Houston jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-10, I-20, I-35 and I-45, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Large units for Houston often arrive by more than one mode. Served by Union Pacific, BNSF and CPKC, all interchanging through the Port Terminal Railroad Association switching network along the Ship Channel. The Port of Houston on the Houston Ship Channel anchors the largest petrochemical complex in the Western Hemisphere, handling breakbulk, bulk and project cargo. Wherever the unit comes off, the rigging from that point to the pad is one plan.
Every transformer & generator rigging job in Houston, TX is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Houston jobs. For bigger moves we walk both sites before we price anything.
The same Houston crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Houston? See truck dispatch for fleets of 4+ trucks.
Working throughout Houston, TX and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Transformer & Generator Rigging throughout Houston and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Pasadena | Harris County | 11 mi |
| Baytown | Harris County | 23 mi |
| Pearland | Brazoria County | 15 mi |
| Sugar Land | Fort Bend County | 19 mi |
| The Woodlands | Montgomery County | 28 mi |
| Katy | Harris County | 28 mi |
| League City | Galveston County | 24 mi |
| Channelview | Harris County | 15 mi |
| Deer Park | Harris County | 15 mi |
| La Porte | Harris County | 22 mi |
| Conroe | Montgomery County | 38 mi |
| Cypress | Harris County | 25 mi |
| Missouri City | Fort Bend County | 15 mi |
| Spring | Harris County | 22 mi |
| Galveston | Galveston County | 47 mi |
| Texas City | Galveston County | 38 mi |
| Friendswood | Galveston County | 19 mi |
| Mission Bend | Fort Bend County | 19 mi |
| Rosenberg | Fort Bend County | 30 mi |
| Alvin | Brazoria County | 25 mi |
| New Caney | Montgomery County | 29 mi |
| Dickinson | Galveston County | 28 mi |
| Angleton | Brazoria County | 41 mi |
| Fresno | Fort Bend County | 16 mi |
Moving across the metro or out of state? See all our Houston services, Transformer & Generator Rigging across Texas or get a quote.
We run transformer & generator rigging in metros across Texas — pick the nearest crew:
Most Houston jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Houston crew.
industrial rigging in Houston →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Houston as one accountable job.
machinery moving in Houston →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Houston.
CNC machine movers in Houston →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Houston plants.
Houston plant & factory relocation →In Houston we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Houston.
The same Houston crew also handles millwright services, machinery removal, crane and rigging services, and machinery loading and unloading.
Specialty rigging in Houston: heavy lift rigging, chiller and HVAC rigging, MRI and medical equipment rigging, lab equipment moving, printing press moving, and data center rigging.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Houston Transformer Quote