Finding a crane in Oklahoma City is the easy part. The hard part is the lift plan, the rigging, the ground under the outriggers, and the crew that signals the pick. We plan and rig crane lifts across the Oklahoma City metro from start to finish — and bring in the right crane for the load, the radius, and the site.
Quick answer: Badass Logistics provides crane & rigging services in Oklahoma City, OK and the surrounding metro. We plan the lift, bring in the crane sized to the load, radius, and site, and rig, signal, and set the pick with our own crew. Our crews work across Oklahoma City and nearby Oklahoma metros, and moves between facilities run as project freight under the same plan — usually quoted the same day. Call (307) 284-1332.
A crane rental gets you a machine and an operator. It does not get you the load weight and center of gravity, the rigging that attaches to the right points, the ground-bearing check under the outriggers, the street or site closure, or the crew that takes the load off the hook and moves it into the building. On Oklahoma City's energy & aerospace jobs, those are the parts that decide whether a pick goes to plan.
Badass Logistics owns the lift, not just the hook time. We size the crane to the load and radius, write the lift plan, rig and signal the pick, and set the load — and where the crane can only reach the door or the dock, the same crew takes it the rest of the way with jacks, skates, and gantries. Crane rental vs a rigging company →
Crane work in Oklahoma City, OK concentrates in the Tinker Air Force Base and Oklahoma City Air Logistics Complex on the city's southeast side, the BNSF logistics hub east of Flynn Yard, and the Oklahoma National Stockyards district in historic Stockyards City, and each of those sets up differently — lot space for outriggers, overhead lines, rail spurs, and neighbors that can't be shut down. The buildings are a mix of large clear-span hangar and depot buildings on the Tinker Air Force Base complex and older single-storey stockyard and warehouse buildings with limited dock heights near Stockyards City, which usually decides whether the crane sets the load inside through a roof opening or at the door for the crew to skate in.
Oklahoma City, OK runs on energy & aerospace, and almost none of it stays put. Same crews and the same crane and rigging services standards across the region:
Oklahoma City's industrial base — energy & aerospace — runs on equipment that doesn't move like freight. Large machine envelopes, documentation expectations, and secure-site access rules shape every move. Typical crane lifts for Oklahoma City customers include:
The picks that come up most in Oklahoma City are aircraft engine and airframe overhaul equipment, oilfield equipment fabrication machinery, livestock handling equipment, and CNC machining centers — and the crane is sized to the heaviest of them at the longest radius the site forces, not to the weight alone. Who is asking changes the plan as much as what is being lifted: a pick for Oklahoma City's aircraft maintenance, repair and overhaul, oil and gas equipment manufacturing, or livestock and cattle marketing usually lands inside a running site, so the lift window, the exclusion zone, and the traffic plan are written around their operation.
RTUs, chillers, cooling towers, and mechanical equipment picked onto roofs across the Oklahoma City metro.
Presses and production equipment lifted on and off trucks or into buildings across the Oklahoma City metro.
Close-to-capacity, high-value, and two-crane picks with detailed plans across the Oklahoma City metro.
Tanks, vessels, generators, and skids placed on foundations and pads across the Oklahoma City metro.
Plenty of Oklahoma City jobs start and finish on one floor. The rest have to travel — to a new building across the metro, a sister plant down I-35, I-40 and I-44, or a facility in another state. We don't hand that part off. It runs as project freight inside the same plan: machines crated or prepped on site, loads sequenced to the rig-out, transport through our licensed broker and carrier partners with dedicated capacity for bigger moves, and our crew waiting at the destination to set it.
Every crane & rigging services job in Oklahoma City, OK is quoted from the actual work, not a rate sheet. These are the things that move the number — send them with your request and you'll get a real quote back fast:
Photos of the equipment, its nameplate, and the path out of the building save a site visit on smaller Oklahoma City jobs. For bigger moves we walk both sites before we price anything.
The same Oklahoma City crews handle every kind of industrial rigging. If your job looks more like one of these, start here:
Running a trucking fleet out of Oklahoma City? See truck dispatch for fleets of 4+ trucks.
Working throughout Oklahoma City, OK and the surrounding metro — backed by a nationwide network of 88 locations when a move crosses state lines.
Crane & Rigging Services throughout Oklahoma City and the industrial suburbs around it — the towns below are where the plants, shops and distribution parks actually sit:
| Town | County | From downtown |
|---|---|---|
| Norman | Cleveland County | 18 mi |
| Edmond | Oklahoma County | 13 mi |
| Moore | Cleveland County | 9 mi |
| Yukon | Canadian County | 14 mi |
| Midwest City | Oklahoma County | 7 mi |
| Del City | Oklahoma County | 5 mi |
| Mustang | Canadian County | 13 mi |
| El Reno | Canadian County | 25 mi |
| Shawnee | Pottawatomie County | 35 mi |
| Stillwater | Payne County | 52 mi |
| Bethany | Oklahoma County | 7 mi |
| Chickasha | Grady County | 37 mi |
| Choctaw | Oklahoma County | 14 mi |
| Guthrie | Logan County | 29 mi |
| Warr Acres | Oklahoma County | 7 mi |
| Newcastle | McClain County | 16 mi |
| The Village | Oklahoma County | 7 mi |
Moving across the metro or out of state? See all our Oklahoma City services, Crane & Rigging Services across Oklahoma or get a quote.
We run crane & rigging services in metros across Oklahoma — pick the nearest crew:
Most Oklahoma City jobs don't stop at one service. The crew that rigs a machine out is the crew that manages the move and sets it back down — so you're dealing with one company from the disconnect to the re-level, not three subcontractors pointing at each other.
Machine has to come off the floor, through the door, or onto a pad before it travels? That's the rigging side of the same Oklahoma City crew.
rigging contractors in Oklahoma City →Presses, compressors, generators, full production lines — disconnected, rigged, hauled, and re-leveled across Oklahoma City as one accountable job.
industrial machinery movers in Oklahoma City →Machine tools are instruments, not freight. VMCs, lathes, and grinders moved on air-ride and squared back to the builder's spec in Oklahoma City.
machine tool movers in Oklahoma City →Moving the whole floor instead of one machine? Phased teardown, sequenced loads, and reinstallation planning for Oklahoma City plants.
Oklahoma City plant relocation →In Oklahoma City we also run riggers, machinery movers, CNC movers, and plant relocation, plus project freight for the jobs we rig — or see every service we offer in Oklahoma City.
The same Oklahoma City crew also handles millwright services, machinery removal, and machinery loading and unloading.
Tell us what's moving and where. We'll route the nearest crew and quote it fast.
Get a Oklahoma City Crane Lift Quote